|
|
Design of the single span bridge in Vražné
Juřenčáková, Jana ; Svoboda, Adam (referee) ; Klusáček, Ladislav (advisor)
The subject of bachelor thesis is a design of single span bridge in Vražné. Within the scope of thesis there are three studies of bridge. Cast-in-place concrete slab super structure was found appropriate and further calculations were assessed. Length of span is 15,00 m. Internal forces were provided by SCIA Engineer and checked with manual calculation. The supporting structure was assessed for the ultimate limit state and serviceability limit state. Calculations were made according to valid standards and regulations.
|
|
|
Design of the bridge in the industry area
Lipus, Rostislav ; Svoboda, Adam (referee) ; Klusáček, Ladislav (advisor)
The aim of this bachelor‘s thesis is the design and analysis of the concrete bridge in industrial area across river Balinka. Thesis contains static analysis of single span bridge which was chosen from three variants. Final variant is sloping prestressed concrete deck supported by two supports. Calculations were made by Scia Engineering software and compared with manual calculation. The supporting structure is assessed for the ultimate limit state and serviceability limit state The design is created in accordance with ČSN EN 1992-2. This thesis does not contain the time dependent analysis.
|
|
|
Slab bridge over a local brook
Olšák, Martin ; Hochman, Dominik (referee) ; Nečas, Radim (advisor)
The subject of this bachelor’s thesis is to design a one field slab bridge over a local brook. The supporting structure is from prestressed concrete with the lenght of 18,00 m. The load effects is calculated by Scia Engineer 2013.1 and compared with manual calculation. The supporting structure is assessed for the ultimate limit state and serviceability limit state. Static assessment is done by hand calculation acording to CSN EN 1992-2.
|
|
|
Arch bridge across the highway
Olšák, Martin ; Trenz, Jan (referee) ; Nečas, Radim (advisor)
The subject of this diploma thesis is design of arch bridge across the highway. Has been elected self-anchored structure with span of arch 60 m and trapezoid bridge deck from prestressed concrete. The load effects is calculated by software Scia Engineer including time dependent analysis. The supporting structure is assessed for the ultimate limit state and serviceability limit state. Static assessment is done by hand calculation according to CSN EN 1992-2. Part of the thesis is drawing and visualization of the bridge.
|
|
|
Prestressed slab bridge
Alušic, Michal ; Zlatuška, Karel (referee) ; Koláček, Jan (advisor)
This thesis is focused on design of a one-field slab bridge. It is a construction made of prestressed concrete. On the basis of the preliminary design a static calculation was processed. The design has been designed and assessed for serviceability limit states and ultimate limit states based on applicable EN standards.
|
|
|
Prestressed bridge slab
Stoklasová, Andrea ; Panáček, Josef (referee) ; Koláček, Jan (advisor)
The aim of the thesis is to design the one pole slab bridge. As a material of the supporting structure has been chosen prestressed concrete. Three preliminary studies have been designed, one of them is selected as the most appropriate solution, and then further elaborated. The span of the bridge is 20 meters. The load effects is calculated using Scia Engineer 17.1 and then compared by manual calculation. An assessment has been made of the ultimate and the serviceability limit state.
|
|
|
Design of a one-span bridge over a local brook
Haluška, Ľuboš ; Koláček, Jan (referee) ; Nečas, Radim (advisor)
The aim of this thesis is the design and analsysis of a one-span bridge over a local brook. Two variants were designed. The variant of one-span prestressed beam bridge with lower bridge desk was chosen for analysis. The calculation of load effect was made in software Scia Engineer. The supporting structure is assessed for the ultimate limit state and the serviceability limit state according to the europien standards. The time dependent analysis is not trated in this thesis.
|
|
|
Prestressed bridge over the Budišovka river
Hroudná, Denisa ; Zich, Miloš (referee) ; Koláček, Jan (advisor)
The subject of this bachelor's thesis is the design of a prestressed bridge over the river Budišovka. Three preliminary studies have been proposed and one of them was selected for more detailed processing. Span length of construction is 18,0 m. Selected variant was assessed for ultimate and serviceability limit state according to CSN EN 1992-2.
|
|
|
Road bridge in Budišov nad Budišovkou
Šedová, Linda ; Strnad, Jiří (referee) ; Koláček, Jan (advisor)
The subject of this bachelor’s thesis is to design a one field road bridge in Budišov nad Budišovkou. The supporting structure is from prestressed concrete with the lenge 21,0 m and span lenght of construction is 18,0 m. The load effects is calculated by Scia and compare with manual calculation. Selected construction was assesed for the serviceability limit state and the ultimate limit state according to ČSN EN 1992-2.
|
|
|
Design of Building on the Wenceslas Square
Moc, Ondřej ; Hladík, Pavel (referee) ; Zich, Miloš (advisor)
The Diploma’s thesis deals with the design of selected parts of reinforced and prestressed concrete structure. Internal forces were solved by software SCIA ENGINEER. Prestress concrete element was solved by module TDA. Phases of construction were considered. Detailed solution is focused on the design of reinforced concrete floor slab with joists within the basement, reinforced concrete beam with five spans within the basement, reinforced girder within the basement, reinforced column within the basement, reinforced footing and prestressed concrete joist within the basement. Drawings of shape and drawings of reinforcement are included in this thesis. Other elements of construction were not solved in this thesis.
|
guest ::
